Ecomesh
Hybrid solar panel
For high thermal demand
The second generation ECOMESH hybrid solar panels incorporate a front cover of innovative EndeF patented technology (CTA technology), that maximizes their thermal output and makes them ideal for cold climates. The cooling produced by the water circuit improves photovoltaic performance, improving its efficiency by up to 15% compared to the traditional photovoltaic panel.
CTA TECNOLOGY
40% REDUCTION IN THE CAPTURE SURFACE
IMPROVES HIGH TEMPERATURE PERFORMANCE
CERTIFICATION TESTS ACCORDING TO EN- 12975
General features
| Cell size | 156×156 mm |
| Cell number | 60 mono |
| Front glass | 3.2 mm tempered glass |
| Weight (empty) | 45.8 kg |
| Dimensions (LxWxT) | 1645 x 978 x 93(+25)mm |
| Junction box | IP65 / IP67 available |
| Cable length | 1000 mm |
| Cable section | 4 mm2 |
| Diodes number | 3 |
| Connectors | MC4 compatible |
| Frame | Aluminium |
| Collection surface | 1.55 m2 |
Thermal specifications
| Maximum pressure | 10 bar |
| Absorber | Copper |
| Fluid Volume | 1,2 L |
| Optical Performance (η0) | 0.51 |
| Heat loss coefficient, a1 | 4.93 W/m2k |
| Heat loss coefficient, a2 | 0.021 W/m2k2 |
| Pressure loss | 0.04 bar |
Electric specifications
Values tested under STC Standard Conditions (AM 1.5, lradiance 1000 W / m2, Cell Temperature 25ºC)
| Nominal Power (Pmax) | 260 Wp |
| Nominal Voltage (Vmp) | 31.65 V |
| Nominal Current (lmax) | 8.06 A |
| Open circuit voltage (Voc) | 38.58 V |
| Short circuit current (lsc) | 9.06 A |
| Output Tolerance | 0 + 4.99 Wp |
| Module Efficiency | 15.98% |
| Maximum system voltage | DC 1000 V (TUV) |
| Working temperature | -40ºC / +85ºC |
| Maximum reverse current | 15A |
| Maximum wind/snow load | 2400Pa/5400Pa |
| Protection degree IP | IP65 |
| Safety class | II |
| Voltage temp. coeficient | -0.37%/K |
| Current temp. coeficient | +0.06%/K |
| Power temp. coeficient | -0.47%/K |
Packing information
| Container | 20´GP | 40´GP | 40´HQ |
| Pallets per container | 12 | 28 | 28 |
| Units per container | 300 | 700 | 770 |
CTA Technology
The ECOMESH PVT-2 hybrid solar panel incorporates CTA technology, an innovative cover system developed and patented by EndeF. The use of the CTA (Transparent Insulating Cover) incorporate a layer on the front of the panel that captures the sun’s rays, reducing losses due to reflection. With it, it is possible to significantly improve the thermal performance of the panel, maximizing its production of hot water and making it one of the most competitive on the market.
Limited surface, greater performance
The use of hybrid solar panels allows us to reduce the necessary collection area by up to 40% compared to traditional solar systems, consisting of photovoltaic modules and thermal collectors. If we also incorporate the CTA technology of our hybrid ECOMESH panel, that percentage increases due to the superior performance of our panel. As a consequence, we produce more energy with the same installed area, reducing the user’s energy expense and CO2 emissions into the atmosphere. The ECOMESH PVT-2 hybrid solar panel has a smaller surface, but a better performance than its competitors.
Why to install ECOMESH solar panels?
If we want to bet for the climate and choose renewable energies, nowadays opting for solar energy is a guarantee of success, both economically and environmentally.
Installing ECOMESH hybrid solar panels is without a doubt the best way to use it. With the ability to generate electricity and heat in half of the space of a separate photovoltaic and thermal installation, ECOMESH hybrid solar panels maximize energy production per m2, thus reducing monthly energy expenditure and associated CO2 emissions.
With the installation of second generation ECOMESH hybrid solar panels, the savings on the energy bill and the conservation of the environment are effective from the first day.
